{"product_id":"boat-life-git-rot-16oz-boa-1064","title":"Boat Life Git Rot\" 16Oz.","description":"\u003ch2 style=\"background-color: white;\"\u003e\u003cstrong\u003eBoatLife Git Rot Penetrating Epoxy Kit\u003c\/strong\u003e\u003c\/h2\u003e \u003cp style=\"background-color: white;\"\u003eBoatLife Git Rot system is a superior product to combat dry rot because it works without having to remove dry rotted fibers. Unique two-part liquid Git Rot Epoxy saturates and restores original strength to wood by penetrating the rot. Wood must be dry for application. Apply by injecting \"Git\" Rot Epoxy into the wood. The epoxy will soak into wood by capillary action.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCures overnight\u003c\/li\u003e \u003cli\u003eSandable and paintable, can be drilled and screwed\u003c\/li\u003e \u003cli\u003eCompatible with fiberglass resins, epoxies and most sealants\u003c\/li\u003e \u003cli\u003eGreat for transoms, stringers and cabin roof rot in both fiberglass and wood boats\u003c\/li\u003e \u003c\/ul\u003e \u003cp style=\"background-color: white;\"\u003e***WILL SHIP GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***\u003c\/p\u003e \u003cdiv align=\"center\"\u003e\u003chr align=\"center\" size=\"2\" width=\"100%\"\u003e\u003c\/div\u003e \u003ch2 style=\"background-color: white;\"\u003e\u003cstrong\u003eHow to Use BoatLife Git Rot Epoxy\u003c\/strong\u003e\u003c\/h2\u003e \u003cp style=\"background-color: white;\"\u003eFor complete saturation and ultimate strength (in average type rot), it will require a volume of Git Rot approximately equal to half the volume of the rotted wood.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTime and Temperature\u003c\/li\u003e \u003cul\u003e \u003cli\u003eOptimum temperature for applying Git Rot Epoxy is between 50°F and 70°F.\u003c\/li\u003e \u003cli\u003eOnly mix small batches (not more than 4 oz.) since the larger the quantity the greater the reaction and the faster the cure.\u003c\/li\u003e \u003cli\u003eAfter adding 1 part \"B\" to 3 parts \"A\", shake vigorously for at least 1 full minute. Once the two parts have been thoroughly mixed, a thermal reaction will begin to occur.\u003c\/li\u003e \u003cli\u003ePenetration is best immediately after mixing.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eProvide Reservoirs\u003c\/li\u003e \u003cul\u003e \u003cli\u003eWhere rot is deep into a large member, it is advisable to drill a staggered series of overlapping holes approximately 1\/4\" in diameter, 2\" apart, slanting downwards. This will expose the necessary end grain and provide reservoirs for the penetration.\u003c\/li\u003e \u003cli\u003eIn areas where sections of rot contain extensive holes where wood fibers are actually missing, it is recommended to mix sawdust with Git Rot Epoxy and use it as a fill material.\u003c\/li\u003e \u003cli\u003eIn areas such as transoms, stringers, and balsa core decking, drilling thru the fiberglass surface may be necessary. For transom repairs, you may drill vertically down through the transom, and then pour in Git Rot.\u003c\/li\u003e \u003cli\u003eFor decking, drill through the surface to treat the wood underneath. Holes left by drilling may be filled with a mixture of dry saw dust and Git Rot or a marine repair epoxy compound.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003eApplication\u003c\/li\u003e \u003cli\u003eThe fastest and most efficient way to apply Git Rot epoxy is into the end grain of the wood.\u003c\/li\u003e \u003cli\u003eTo avoid trapping air in the middle of the rot, always start at one end or on one surface and work progressively along.\u003c\/li\u003e \u003cli\u003eContinue until complete saturation is achieved. *This is determined when the reservoir holes fill and remain filled, and the surface remains shiny\u003c\/li\u003e \u003cli\u003eProperly applied, Git Rot solidifies into a tough resilient mass overnight. Allow one week for ultimate strength.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_To_Use-BoatLife_Git_Rot.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"60\" height=\"60\"\u003eClick here to download BoatLIFE Git Rot application tips from the manufacturer.\u003c\/a\u003e\u003c\/p\u003e \u003cp style=\"background-color: white;\"\u003eGit Rot Epoxy will eventually cure into damp wood, however wet wood cannot be fully saturated or the product will lose its effectiveness. Be sure to dry the area as much as possible before application.\u003c\/p\u003e","brand":"Boat Life","offers":[{"title":"Default Title","offer_id":67605070905659,"sku":"BOA-1064","price":77.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/4271\/8779\/files\/384165_source_1528487159.jpg?v=1790704082","url":"https:\/\/clinchriverfishingusa.com\/products\/boat-life-git-rot-16oz-boa-1064","provider":"Clinch River Fishing USA","version":"1.0","type":"link"}