{"product_id":"interlux-paint-act-brown-gal-ilx-y8890u-1","title":"Interlux Paint ACT BROWN GAL","description":"\u003ch2\u003eInterlux ACT Ablative Antifouling Bottom Paint\u003c\/h2\u003e \u003cp\u003eInterlux ACT is a trusted single-season ablative bottom paint that delivers excellent season-to-season protection in moderate to heavy fouling waters. Using Ablative Copolymer Technology, the coating slowly wears away with use, continually exposing fresh biocide at the surface. This controlled erosion helps prevent marine growth while eliminating the heavy paint build-up and aggressive sanding associated with many hard bottom paints.\u003c\/p\u003e \u003cp\u003eWith a higher copper content and a built-in Slime Fighter additive, ACT is very effective at controlling shell fouling such as barnacles and zebra mussels, as well as weed, slime and algae. It can be used on fiberglass, wood and properly primed metal hulls (not aluminum) in fresh, salt and brackish water, making it a versatile choice for a wide range of powerboats and sailboats.\u003c\/p\u003e \u003cp\u003eAvailable in popular colors including black, blue, red, green and brown, ACT is a go-to ablative paint for boaters and boatyards looking for reliable performance and easier maintenance between haul-outs.\u003c\/p\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eBest Uses\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSingle-season antifouling protection for powerboats and sailboats\u003c\/li\u003e \u003cli\u003eBoats kept in moderate to heavy fouling waters (algae, slime, barnacles, zebra mussels)\u003c\/li\u003e \u003cli\u003eFresh, salt, and brackish water marinas and moorings\u003c\/li\u003e \u003cli\u003eOwners who want an ablative coating that minimizes paint build-up and sanding at recoat time\u003c\/li\u003e \u003cli\u003eFiberglass, wood, and properly primed steel or lead hulls below the waterline (not suitable for aluminum)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eAblative Copolymer Technology:\u003c\/strong\u003e Coating wears away in a controlled manner during use, continuously exposing fresh biocide and helping prevent premature wear-through.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHigh copper content with Slime Fighter:\u003c\/strong\u003e Formulated to control hard growth such as barnacles and zebra mussels and soft growth like weed, slime and algae, keeping the hull cleaner for longer.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eReduced paint build-up:\u003c\/strong\u003e Because the film gradually erodes, there is less old paint to sand off at recoat time compared to many hard bottom paints.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSeason-to-season protection:\u003c\/strong\u003e Provides dependable single-season protection when applied at the recommended film thickness and coverage.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAll-water versatility:\u003c\/strong\u003e Can be used in fresh, salt, and brackish waters, ideal for boats that move between different environments.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFlexible application:\u003c\/strong\u003e Can be applied by brush, roller, or airless spray over most existing antifouling coatings that are in sound condition, following Interlux compatibility guidance.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eApplication \u0026amp; System Overview\u003c\/h3\u003e \u003cp\u003eInterlux ACT can be applied over most well-adhered antifouling paints or as part of an Interlux system over properly prepared bare substrates. Always read the product label and technical datasheet before starting your bottom paint project.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Fiberglass, wood, and properly primed steel or lead below the waterline (not for aluminum hulls or drives).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eExisting antifouling:\u003c\/strong\u003e Confirm compatibility using the Interlux antifouling compatibility chart. The existing coating must be aged, firmly adhered, and in good condition.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e Apply a minimum of two full coats, with an extra stripe coat on high-wear areas such as the waterline, chines, leading edges and rudders. Three coats are recommended on bare wood.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMethods:\u003c\/strong\u003e Apply by brush, 3\/8\" nap solvent-resistant roller, or airless spray using equipment suitable for solvent-based marine coatings.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eStir or shake ACT thoroughly before and during application to keep the copper and resins evenly mixed. Thin only if necessary, and never more than the maximum amount specified on the label.\u003c\/p\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eSurface Preparation Overview\u003c\/h3\u003e \u003cp\u003eProper surface preparation is critical to adhesion and antifouling performance. The summary below should be used in conjunction with the full Interlux instructions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – good condition\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eScrub the bottom to remove slime, salts and loose growth, then rinse and allow to dry.\u003c\/li\u003e \u003cli\u003eSand the existing coating with 80-grit wet-or-dry paper as recommended to create a smooth, dull surface.\u003c\/li\u003e \u003cli\u003eRemove all sanding residue and apply the recommended number of coats of ACT.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – poor condition\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eCompletely remove loose, flaking, or excessively built-up antifouling paint.\u003c\/li\u003e \u003cli\u003eFor fiberglass and wood, use an appropriate paint remover such as Interstrip 299E; for steel, sandblast to near white metal.\u003c\/li\u003e \u003cli\u003eOnce the substrate is clean and sound, follow the appropriate bare fiberglass, bare wood, or primed metal system before applying ACT.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eBare fiberglass\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRemove mold-release agents and wax with the recommended Interlux fiberglass prep products.\u003c\/li\u003e \u003cli\u003eFair any imperfections with a suitable marine fairing compound.\u003c\/li\u003e \u003cli\u003eFollow either the no-sand, sanding, or blister-prevention system recommended by Interlux, typically involving a primer or barrier coat such as InterProtect® 2000E before applying ACT.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eBare wood\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSand the surface smooth with 80-grit paper and remove sanding dust.\u003c\/li\u003e \u003cli\u003eApply the first coat of ACT thinned slightly with the recommended thinner to aid penetration, then apply additional full-strength coats as directed.\u003c\/li\u003e \u003cli\u003eFill seams if needed with an appropriate seam compound before finishing with full coats of ACT.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePrimed steel or lead\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePrime bare metal below the waterline according to Interlux recommendations.\u003c\/li\u003e \u003cli\u003eWithin the primer’s overcoat window, apply the specified number of coats of ACT.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eApplication Tips\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eApply only when the product and surface temperatures are at or above the minimum temperature specified on the label (typically 50°F \/ 10°C and above).\u003c\/li\u003e \u003cli\u003eUse quality solvent-resistant rollers and brushes designed for marine coatings.\u003c\/li\u003e \u003cli\u003eRespect the stated drying and recoat times between coats and before launching the boat.\u003c\/li\u003e \u003cli\u003eDo not apply ACT over tin-based copolymer antifouling paints.\u003c\/li\u003e \u003cli\u003eAfter haul-out, clean the coated surface before relaunching to help reactivate the film and maintain performance.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAlways consult the full \u003ca title=\"ACT Bottom Paint Technical Data Sheet\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/Interlux-ACT-Bottom-Paint-Application-Instructions.pdf\" target=\"_blank\"\u003eInterlux ACT technical datasheet\u003c\/a\u003e and product label for complete preparation, application, safety, and dry-time information before beginning your bottom painting project.\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":67605393244475,"sku":"ILX-Y8890U-1","price":257.79,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/4271\/8779\/files\/890273_source_1751561812.jpg?v=1790707322","url":"https:\/\/clinchriverfishingusa.com\/products\/interlux-paint-act-brown-gal-ilx-y8890u-1","provider":"Clinch River Fishing USA","version":"1.0","type":"link"}