{"product_id":"interlux-paint-bilgekote-gray-qt-ilx-yma100","title":"Interlux Paint Bilgekote Gray Qt.","description":"\u003ch2\u003eInterlux Bilgekote Bilge Enamel Marine Paint\u003c\/h2\u003e \u003cp\u003eInterlux Bilgekote is a fast drying, durable coating formulated for application to bilge areas. This paint helps prevent absorption of oil, gasoline or sludge into wood and fiberglass. Features a semi gloss finish and is available in white or gray.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eHard wearing coating for bilges and bulkheads.\u003c\/li\u003e \u003cli\u003eChemical resistance to fumes, fuel and oil.\u003c\/li\u003e \u003cli\u003eHigh opacity for thorough coverage.\u003c\/li\u003e \u003cli\u003eCleans easily for reduced upkeep.\u003c\/li\u003e \u003cli\u003e\u003cstrong\u003eSold in quarts\u003c\/strong\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003chr\u003e \u003ch2\u003eHow to Apply Interlux Bilgekote Marine Paint\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eApplication Method: \u003c\/strong\u003eBrush, roller, or spray\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNumber of Coats: \u003c\/strong\u003eTwo coats minimum\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoverage: \u003c\/strong\u003e450 sq. ft.\/gal.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eThinner: \u003c\/strong\u003eBrushing Liquid 333 or Special Thinner 216\u003c\/li\u003e \u003c\/ul\u003e \u003ctable style=\"height: 75px; width: 400px;\" border=\"1\" cellspacing=\"1\"\u003e\n\u003ccaption\u003e\u003cstrong\u003eDry Times\u003c\/strong\u003e\u003c\/caption\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd style=\"text-align: left;\"\u003e \u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003e  59°F\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003e  73°F\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003e  95°F\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003e  Touch Dry\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e  3 hours\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e  2 hours\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e  1 hour\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: left;\"\u003e\u003cstrong\u003e  Overcoated By (min)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e  16 hours\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e  12 hours\u003c\/td\u003e \u003ctd style=\"text-align: left;\"\u003e  8 hours\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eBare Fiberglass In Good Condition:\u003c\/strong\u003e\u003c\/li\u003e \u003cul\u003e \u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e \u003cli\u003eRinse with fresh water and allow to dry.\u003c\/li\u003e \u003cli\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/li\u003e \u003cli\u003eSand with 180 grade paper. Remove sanding residue.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003e\u003cstrong\u003eBare Fiberglass In Poor Condition:\u003c\/strong\u003e\u003c\/li\u003e \u003cul\u003e \u003cli\u003eClean as above.\u003c\/li\u003e \u003cli\u003eSand with 80 grade paper then remove sanding residue.\u003c\/li\u003e \u003cli\u003eApply 1-2 coats of Pre-Kote primer.\u003c\/li\u003e \u003cli\u003eSand each coat with 120 grit sandpaper then remove sanding residue.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003e\u003cstrong\u003eBare Wood\u003c\/strong\u003e\u003c\/li\u003e \u003cul\u003e \u003cli\u003eSand surface then wipe clean.\u003c\/li\u003e \u003cli\u003eApply Pre-Kote, sand surface and wipe clean.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003e\u003cstrong\u003eBare Metal\u003c\/strong\u003e\u003c\/li\u003e \u003cul\u003e \u003cli\u003eSandblast or grind, remove sanding residue.\u003c\/li\u003e \u003cli\u003eWithin 1 hour of abrasion, apply 1 coat of Interprotect 2000E thinned 15-20%.\u003c\/li\u003e \u003cli\u003eFollowing the overcoating guidelines for Interprotect 2000E. Apply 1-2 coats of Pre-Kote.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003e\u003cstrong\u003eClear Epoxy\u003c\/strong\u003e\u003c\/li\u003e \u003cul\u003e \u003cli\u003eBegin by scrubbing well using soap and water and a stiff brush.\u003c\/li\u003e \u003cli\u003eRinse with fresh water and allow to dry.\u003c\/li\u003e \u003cli\u003eDegrease with YMA601V Fiberglass Surface Prep.\u003c\/li\u003e \u003cli\u003eSand with 80 grit paper then remove sanding residue.\u003c\/li\u003e \u003cli\u003eApply one coat of Epoxy Primekote or Interprotect 2000E.\u003c\/li\u003e \u003c\/ul\u003e \u003cli\u003e\u003cstrong\u003ePreviously Painted Surfaces\u003c\/strong\u003e\u003c\/li\u003e \u003cul\u003e \u003cli\u003eThe surface must be clean and dry.\u003c\/li\u003e \u003cli\u003eSand using 180-220 grit paper, then remove sanding residue.\u003c\/li\u003e \u003c\/ul\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eApply 2-3 coats of Bilgekote following the proper dry times.\u003c\/li\u003e \u003cli\u003eSand between coats using 220-230 grit paper, then remove sanding residue.\u003c\/li\u003e \u003cli\u003eBilgekote may be applied by roller and brush using the roll and tip method.\u003c\/li\u003e \u003cli\u003eBilgekote may also be applied by spray.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Bilgekote_Marine_Paint.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"56\" height=\"53\"\u003eClick to Download Interlux Bilgekote Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":67605397111099,"sku":"ILX-YMA100","price":49.19,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/4271\/8779\/files\/429370_source_1751999549.jpg?v=1790707461","url":"https:\/\/clinchriverfishingusa.com\/products\/interlux-paint-bilgekote-gray-qt-ilx-yma100","provider":"Clinch River Fishing USA","version":"1.0","type":"link"}