{"product_id":"interlux-paint-micron-csc-black-qt-ilx-5583q","title":"Interlux Paint Micron Csc Black Qt","description":"\u003ch2\u003eInterlux Micron CSC Antifouling Bottom Paint\u003c\/h2\u003e \u003cp\u003eInterlux Micron CSC is a premium self-polishing ablative bottom paint that delivers long-lasting, multi-season protection against marine fouling. Using Micron Technology, this copper-copolymer formula slowly wears away in a controlled way as the boat moves, continually exposing fresh biocide at the surface. That means reliable antifouling performance in fresh, salt, and brackish water without the heavy paint build-up and aggressive sanding associated with many hard bottom paints.\u003c\/p\u003e \u003cp\u003eMicron CSC is suitable for both powerboats and sailboats and can be used on fiberglass, wood, and properly primed steel or lead below the waterline. It is not recommended for aluminum hulls or underwater aluminum components. Available in a range of popular colors, it’s one of the most trusted choices for boaters who want proven, easy-to-maintain multi-season protection.\u003c\/p\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eBest Uses\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMulti-season antifouling protection for powerboats and sailboats\u003c\/li\u003e \u003cli\u003eBoats that stay in fresh, salt, or brackish water for extended periods\u003c\/li\u003e \u003cli\u003eOwners who want an ablative coating that minimizes bottom paint build-up and sanding at recoat time\u003c\/li\u003e \u003cli\u003eBoats that are hauled for winter storage and relaunched the following season\u003c\/li\u003e \u003cli\u003eFiberglass, wood, and properly primed steel or lead hulls below the waterline (not suitable for aluminum)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eKey Features \u0026amp; Benefits\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMulti-season ablative protection:\u003c\/strong\u003e Micron Technology provides long-lasting defense against a wide range of fouling in all water types when applied at the recommended film thickness.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCopper-copolymer formula:\u003c\/strong\u003e Uses a controlled-solubility copolymer with cuprous oxide to maintain an active biocide layer at the paint surface throughout the season.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSelf-polishing, low build-up:\u003c\/strong\u003e The coating gradually erodes in a controlled way, like a bar of soap, helping prevent excessive paint build-up and reducing the amount of sanding needed at recoat.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHaul and relaunch flexibility:\u003c\/strong\u003e Micron CSC can be hauled for storage and relaunched later without losing effectiveness, provided the film is in good condition and properly cleaned before going back in the water.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSmoother, more efficient hull:\u003c\/strong\u003e The polishing action helps the bottom remain smooth, which can improve speed and fuel efficiency compared to rough or heavily built-up coatings.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eVersatile application:\u003c\/strong\u003e Can be applied by brush, roller, or spray over most existing antifouling paints that are in sound condition, following the Interlux compatibility guidelines.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eApplication \u0026amp; System Overview\u003c\/h3\u003e \u003cp\u003eMicron CSC can be applied over most well-adhered antifouling coatings or directly to properly prepared bare substrates as part of an Interlux paint system. Always read the product label and technical datasheet before starting a job.\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eSubstrates:\u003c\/strong\u003e Fiberglass, wood, and properly primed steel or lead below the waterline (not for aluminum hulls or drives).\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eExisting antifouling:\u003c\/strong\u003e Confirm compatibility with the Interlux antifouling compatibility chart. The existing paint must be aged, tightly adhered, and in good condition.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoats:\u003c\/strong\u003e Typically 2–3 full coats are recommended, with an extra stripe coat on high-wear areas such as the waterline, chines, rudders, and leading edges.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMethods:\u003c\/strong\u003e Apply by brush, roller, or spray using equipment suitable for solvent-based bottom paints, following all safety and ventilation guidelines.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAlways stir or shake Micron CSC thoroughly before and during application to keep the copper and resins evenly distributed in the can.\u003c\/p\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eSurface Preparation Overview\u003c\/h3\u003e \u003cp\u003eGood surface preparation is essential for maximum performance and adhesion. The steps below are a general overview; always follow the detailed instructions on the Micron CSC label and technical datasheet.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – in good condition\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eScrub the bottom to remove slime, salts, and loose growth, then rinse and allow to dry.\u003c\/li\u003e \u003cli\u003eLightly sand with the recommended grit if required to create a smooth, dull surface.\u003c\/li\u003e \u003cli\u003eRemove sanding residue and apply the recommended number of coats of Micron CSC.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003ePreviously painted surfaces – in poor condition\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRemove loose, flaking, or excessively built-up antifouling by appropriate methods (chemical stripper, sanding, or blasting as recommended for the substrate).\u003c\/li\u003e \u003cli\u003eOnce the substrate is clean and sound, follow the bare fiberglass, bare wood, or primed metal system specified by Interlux before applying Micron CSC.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eBare fiberglass\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eRemove mold-release agents, wax, and contaminants with the appropriate Interlux fiberglass surface prep products.\u003c\/li\u003e \u003cli\u003eFair any imperfections as needed with a suitable marine fairing compound.\u003c\/li\u003e \u003cli\u003eFollow either the sanding or no-sand system recommended by Interlux, which may include a barrier coat such as InterProtect® 2000E before applying Micron CSC.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eBare wood\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eSand the surface smooth and clean off dust and contaminants.\u003c\/li\u003e \u003cli\u003eApply any primers or sealers recommended by Interlux for bare wood systems below the waterline.\u003c\/li\u003e \u003cli\u003eFinish with the specified number of coats of Micron CSC, paying special attention to plank seams and end grain.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eSteel or lead (properly primed)\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003ePrime bare metal according to Interlux recommendations for underwater metal substrates.\u003c\/li\u003e \u003cli\u003eOnce the primer system is complete and within its recoat window, apply the recommended coats of Micron CSC.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3 style=\"margin-top: 0; margin-bottom: 0; font-size: 16pt;\"\u003eApplication Tips\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eApply only within the temperature and weather conditions specified on the label; avoid very cold, very hot, or extremely humid conditions.\u003c\/li\u003e \u003cli\u003eUse high-quality, solvent-resistant rollers and brushes designed for marine coatings.\u003c\/li\u003e \u003cli\u003eDo not thin the paint more than recommended; if thinning is required, use the specified Interlux thinner and follow the label directions.\u003c\/li\u003e \u003cli\u003eObserve the stated drying and recoat times between coats and before launching the boat.\u003c\/li\u003e \u003cli\u003eAfter haul-out, clean the coated surface with a stiff brush or light pressure wash before relaunching to reactivate the film.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eAlways review the full Interlux Micron CSC technical datasheet and product label for complete preparation, application, safety, and dry-time information before starting your bottom paint project.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSafety Data Sheet (SDS)\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eClick here to download the\u003ca title=\"Micron CSC Safety Data Sheet PDF Download\" href=\"https:\/\/store-6rtev5owwo.mybigcommerce.com\/content\/PDFs\/Interlux-Micron-CSC-Bottom-Paint-Safety-Data-Sheet.pdf\" target=\"_blank\"\u003e Interlux Micron CSC Safety Data Sheet (SDS)\u003c\/a\u003e for detailed safety, handling, and first-aid information.\u003c\/p\u003e","brand":"Interlux Paint","offers":[{"title":"Default Title","offer_id":67605391212859,"sku":"ILX-5583Q","price":124.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/4271\/8779\/files\/426789_source_1751560526.jpg?v=1790707272","url":"https:\/\/clinchriverfishingusa.com\/products\/interlux-paint-micron-csc-black-qt-ilx-5583q","provider":"Clinch River Fishing USA","version":"1.0","type":"link"}