{"product_id":"pettit-paint-bio-blue-pre-paint-clnr-qt-pet-92q","title":"Pettit Paint Bio-Blue Pre-Paint Clnr Qt","description":"\u003cp\u003e\u003cstrong\u003ePettit Bio-Blue Marine Hull Surface Prep\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eBio-Blue Hull Surface Prep is a powerful blend of cleaning agents and silica grit that de-waxes, etches, cleans, and prepares bare fiberglass for painting. Regardless of the boat’s age, the initial surface preparation is imperative. Residual parting agents utilized by the boat manufacturer to “pop” the boat from the mold may still be present, although not visibly apparent. This solvent-free product is designed to provide an easy and trouble-free method of removing unwanted contaminants, grease, wax, dirt, and mold release agents from fiberglass surfaces prior to painting. When used in conjunction with 6998 Skip Sand Primer or 6999 Sandless Primer and antifouling paint, it is part of an easy 1-2-3 system of bottom painting.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eDe-waxes, etches, cleans, de-greases and prepares bare fiberglass for painting \u003c\/li\u003e \u003cli\u003eEasy to use formula \u003c\/li\u003e \u003cli\u003eWorks on all fiberglass surfaces \u003c\/li\u003e \u003cli\u003eBiodegradable with no VOC content \u003c\/li\u003e \u003cli\u003ePart of an easy 1-2-3 system of bottom painting\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approx. 600 sq. ft\/gal.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNumber of Applications:\u003c\/strong\u003e One\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv class=\"tab_description\"\u003e \u003ch2 class=\"tab_label\"\u003eHow To Apply\u003c\/h2\u003e \u003cdiv class=\"tab_content\"\u003e \u003cp\u003e\u003cstrong\u003eAPPLICATION DATA METHOD\u003c\/strong\u003e: Apply by using a short nap (3\/16 inch maximum) roller followed with a Scotch-Brite pad.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNUMBER OF COATS:\u003c\/strong\u003e 1\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCOVERAGE:\u003c\/strong\u003e 600 sq. ft\/gal.\u003c\/p\u003e \u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eDRY TIME PRIOR TO PAINTING: \u003c\/strong\u003e1 hour min\u003c\/p\u003e \u003cp style=\"text-align: left;\"\u003e\u003cstrong\u003eDIRECTIONS FOR USE:\u003c\/strong\u003e  Pour out some of the 92 Bio-Blue into a roller pan, then using a short nap roller (3\/16 inch maximum) apply the 92 Bio-Blue Hull Surface Prep to an area approximately 5 feet by 5 feet. Once the area has been covered with the Bio-Blue, scrub the surface using a fine to medium Scotch-Brite pad. The scrubbing should be done by hand in a circular motion. Be sure to wear splash goggles and rubber gloves and do not let 92 Bio-Blue come in contact with your skin. Be sure that all areas coated with the 92 Bio-Blue have been scrubbed with the Scotch-Brite pad. Stay within the 5 feet by 5 feet area and do not attempt to scrub beyond this area once the 92 Bio-Blue has been rolled on. After the section has been scrubbed, wipe the area with a wet sponge until all of the 92 Bio-Blue and scrubbing residue has been completely removed from the surface. Rinse sponge and change rinse water often. Where feasible, hose off the surface residue and residual 92 Bio-Blue with fresh water. Continue prepping the hull in this manner until the entire surface to be painted has been thoroughly cleaned. The gel coat should have a frosty look when the surface has been properly prepared.\u003c\/p\u003e \u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #0000ff; text-decoration: underline;\"\u003e\u003cspan style=\"font-size: small;\"\u003e\u003cstrong\u003eDO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c!-- snippet location product_description --\u003e \u003cp\u003e California Residents: \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/4c731d90-821b-013f-159c-7692448c53ea\/e\/5184b8b0-7ec1-013f-1cb3-16eaae88d95a\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e \u003cstrong\u003e WARNING \u003c\/strong\u003e Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e \u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Default Title","offer_id":67605723840827,"sku":"PET-92Q","price":46.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/4271\/8779\/files\/382792_source_1647354901_1f7e18f2-3a64-4b7a-a40b-adfe0f1b3a96.jpg?v=1790793094","url":"https:\/\/clinchriverfishingusa.com\/products\/pettit-paint-bio-blue-pre-paint-clnr-qt-pet-92q","provider":"Clinch River Fishing USA","version":"1.0","type":"link"}