{"product_id":"pettit-paint-hydrocoat-eco-blue-gal-pet-1204g","title":"Pettit Paint Hydrocoat Eco Blue Gal","description":"\u003ch2\u003ePettit Hydrocoat Eco Ablative Antifouling Paint\u003c\/h2\u003e \u003cp\u003e\u003cspan id=\"docs-internal-guid-e26b3029-7fff-27be-9c74-469a082a38b2\"\u003e\u003cstrong\u003eGo green without sacrificing performance with Pettit Hydrocoat Eco, a copper-free antifouling paint formulated for superior multi-season protection.\u003c\/strong\u003e\u003cspan\u003e Using advanced Econea biocide technology, this water-based ablative formula effectively prevents marine growth while reducing environmental impact. Its self-polishing action minimizes paint buildup, ensuring a smooth, fuel-efficient hull. Perfect for boats in both saltwater and freshwater, it applies easily and cleans up with just soap and water. Hydrocoat Eco is the ideal choice for eco-conscious boaters seeking reliable antifouling performance. \u003c\/span\u003e\u003cspan\u003eAvailable in white, blue, black, or brown. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003ePettit’s hydrocoat formula has been leading the way in marine ablative technology for 20 years.  These water-based paints are industry leaders, and the Pettit Hydrocoat Eco is the newest breakthrough in ablative antifouling paints. It is formulated with the newest, groundbreaking water-based copolymer formula.\u003c\/p\u003e \u003cp\u003ePettit Hydrocoat Eco uses Pettit’s exclusive organic biocide formula - Econea. This copper and metal-free biocide bottom paint is raising the bar in ablative antifouling paints. The Pettit Hydrocoat Eco provides multi-season protection against the harshest of conditions. The paint film slowly wears away with use and is effective in and out of the water.  The Pettit Hydrocoat Eco is a tough slime-fighting inhibitor that is a great choice for jet drives, outdrives, and outboard motors.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eEasy application and cleanup with soap \u0026amp; water\u003c\/li\u003e \u003cli\u003eWater-based, \u003cstrong\u003ecopper-free\u003c\/strong\u003e, self-polishing ablative antifouling paint\u003c\/li\u003e \u003cli\u003eCo-polymer ablative technology eliminates sanding and paint build-up\u003c\/li\u003e \u003cli\u003eDual-biocides provide outstanding multi-season protection in all conditions\u003c\/li\u003e \u003cli\u003eUses the power of organic ECONEA™ for better protection and a greener earth\u003c\/li\u003e \u003cli\u003eRecommended Usage: All fouling waters\u003c\/li\u003e \u003cli\u003eBiocide: 6.0% ECONEA\u003c\/li\u003e \u003cli\u003eAdditives: 4.8% Zinc Pyrithione\u003c\/li\u003e \u003cli\u003eCoverage: 430sq.ft.\/gal.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003eHydrocoat ECO is comparable to Interlux Micron CF and Pettit Ultima Eco\u003c\/em\u003e\u003c\/p\u003e \u003chr\u003e \u003ch2\u003eHow Much Pettit Hydrocoat Eco Do I Need for My Boat?\u003c\/h2\u003e \u003cp\u003eRefer to the chart below to calculate how much Hydrocoat Eco paint you will need for your boat.\u003c\/p\u003e \u003cp\u003e\u003cimg class=\"__mce_add_custom__\" title=\"Pettit Hydrocoat ECO Chart\" src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pettit-bottom-paint-chart2.png\" alt=\"Pettit Hydrocoat ECO Chart\" width=\"600\" height=\"141\"\u003e\u003c\/p\u003e \u003col\u003e\u003col\u003e \u003cli\u003eCalculate the square footage of the hull to be painted - multiply the length of the hull by the beam then multiply that total by .85\u003c\/li\u003e \u003cli\u003eDivide that number (your square foot total) by the amount of coverage Hydrocoat Eco provides. (430 square foot per gallon). This will give you a one-coat total.\u003c\/li\u003e \u003c\/ol\u003e\u003c\/ol\u003e \u003cp\u003eExample: If your boat has a length of 28', and a beam of 8.5', you will multiply 28 x 8.5 x .85 to get your total square footage. The total square footage for this boat is 202.3 square feet. A gallon of Hydrocoat Eco has a coverage of 430 square feet per gallon for one coat, so one gallon will be enough for two coats.\u003c\/p\u003e \u003chr\u003e \u003ch2\u003eHow to Apply Pettit Hydrocoat Eco Antifouling Paint\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMethod:\u003c\/strong\u003e Brush, roller, airless or conventional spray.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNumber of Coats:\u003c\/strong\u003e 2 minimum with additional coat at waterline recommended.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDry Film Thickness per Coat:\u003c\/strong\u003e 1.4 mils (4.0 wet mils)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplication Temp:\u003c\/strong\u003e 50° F. Min. \/ 90°F. Max.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eThinner:\u003c\/strong\u003e Water\u003c\/li\u003e \u003c\/ul\u003e \u003ctable style=\"width: 100%;\" border=\"1\" cellspacing=\"0\" cellpadding=\"0\"\u003e\n\u003ccolgroup\u003e\n\u003ccol span=\"4\" width=\"64\"\u003e \u003c\/colgroup\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd class=\"xl66\" style=\"text-align: center;\" colspan=\"4\" width=\"256\" height=\"20\"\u003e\u003cstrong\u003eDry Time* (HOURS)\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\" height=\"20\"\u003e\u003cstrong\u003eTemp\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eTo Touch\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eTo Recoat\u003c\/strong\u003e\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e\u003cstrong\u003eTo Launch\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\" height=\"20\"\u003e90°\u003c\/td\u003e \u003ctd class=\"xl65\" style=\"text-align: center;\"\u003e1\/4 HR\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e1.5 HR\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e12 HR\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\" height=\"20\"\u003e70°\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e1\/2 HR\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e3 HR\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e16 HR\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd style=\"text-align: center;\" height=\"20\"\u003e50°\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e1 HR\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e6 HR\u003c\/td\u003e \u003ctd style=\"text-align: center;\"\u003e48 HR\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cp\u003e\u003cstrong\u003ePreviously Painted Surfaces:\u003c\/strong\u003e To paint old, hard antifoulings, thoroughly wipe down the surface with 120 Brushing Thinner, pying particular attention to waterline areas, then sand painted surface with 80 grit sandpaper. Wipe clean of sanding residue with water and apply hydrocoat Eco. Old tin or copper copolymers or Teflon based antifoulings should be sanded thoroughly with 80 grit sandpaper to remove the chalky outer surface, wiped clean of sanding residue, and then may be over coated directly with Hydrocoat Eco. Traditional, soft antifoulings should be removed before applying Hydrocoat Eco.*The above dry times are minimums. Hydrocoat Eco may be recoated after the minimum time shown. There is no maximum dry time before launching.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBare Fiberglass:\u003c\/strong\u003e All bare fiberglass, regardless of age, should be thoroughly cleaned with 92 Bio-Blue Hull Surface Prep or de-waxed several times with Pettit D-95 Dewaxer or 120 Brushing Thinner. Sand thoroughly with 80 grit sandpaper to a dull, frosty finish and rewash the sanded surface with 120 Brushing Thinner to remove sanding residue. Then apply two or three coats of Hydrocoat Eco, following application instructions. Careful observation of the above instructions will help ensure long term adhesion of this and subsequent years’ antifouling paint.\u003c\/p\u003e \u003cp\u003eTo eliminate the sanding operation, prep the surface with 92 Bio-Blue Hull Surface Prep or wash the fiberglass three times using Pettit 95 Dewaxer only. Then apply one thin coat of Pettit 6998 Skip-Sand Primer. Use a 3\/16” or less nap when applying by roller. Consult the primer label for complete application and antifouling top coating instructions. Apply two or three coats of Hydrocoat Eco.\u003c\/p\u003e \u003cp\u003eEasy 2-Step Sandless Method - Thoroughly clean and prep hull using 92 Bio-Blue and a Scotch-brite pad as described above. Make sure that the entire surface has a dull, frosty finish. Wipe surface to remove any excess moisture and apply two coats of Hydrocoat Eco.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBarrier Coat:\u003c\/strong\u003e Fiberglass bottoms potentially can form osmotic blisters within the gelcoat and into the laminate. To render the bottom as water impermeable as possible, prepare the fiberglass surface as mentioned above (sanding method) then apply three coats of Pettit Protect 4700\/4701 High Build Epoxy Primer per label directions. Apply two or three finish coats of Hydrocoat Eco.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBlistered Fiberglass:\u003c\/strong\u003e See Pettit Technical Bulletin TB-1000 Gelcoat Blister Repair and Prevention Specification for detailed instructions.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBare Aluminum:\u003c\/strong\u003e Sandblast to clean, bright metal and remove blasting residue with clean, dry compressed air or a clean brush. Immediately apply three coats of Pettit 4400\/4401 Aluma Protect Epoxy Primer followed by two finish coats of this product. Read and follow carefully the instructions on the Pettit 4400\/4401 Aluma Protect Epoxy Primer label. If the surface to be painted is smooth aluminum, apply one coat of 6455\/044 Metal Primer and allow to dry for 2 hours, then apply two finish coats of this product. Read and follow carefully the instructions for application and top-coating on the 6455\/044 primer label.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eBare Wood:\u003c\/strong\u003e Sand entire surface with 80 grit paper; wash clean with 120 Brushing Thinner. Apply a coat of Hydrocoat Eco thinned 25% with water, allow an overnight dry, lightly sand and wipe clean. Apply two finish coats of Hydrocoat Eco. Any metal parts must be primed before applying the bottom paint.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSteel Hulls:\u003c\/strong\u003e To remove loose rust and scale from the metal surface, scrape, sandblast or wire brush. Solvent clean the surface to remove grease and dirt then apply one or two coats of Pettit 6980 Rustlok* followed by two coats of Pettit 4700\/4701 High Build Epoxy Primer. Follow with Hydrocoat Eco.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eUnderwater Metal Parts:\u003c\/strong\u003e Abrade to clean bright metal by scraping, sandblasting or wire brushing. Solvent clean and apply one thin coat of Pettit 6455\/044 Metal Primer*. Let dry two hours and apply two coats of Pettit 6627 Tie Coat Primer*. Let the second coat of 6627 Tie-Coat Primer dry at least four hours and apply Hydrocoat Eco.\u003c\/p\u003e \u003cp\u003e\u003cem\u003e*These are simplified systems for small areas. Please consult your Pettit representative or the Pettit Technical Department for more complex, professional systems. Always read the labels or tech sheets for all products specified herein before using.\u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003ca title=\"How to Apply PDF\" href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat_ECO.pdf\" target=\"_parent\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"40\" height=\"39\"\u003e\u003c\/a\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/How_to_Apply_Pettit_Hydrocoat_ECO.pdf\"\u003eClick to Download Pettit Hydrocoat Eco Antifouling Paint Application Instructions\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003ch2 style=\"margin-top: 0; margin-bottom: 10px;\"\u003eFrequently Asked Questions\u003c\/h2\u003e \u003ch3 style=\"margin-top: 5px; margin-bottom: 0; font-size: 12pt;\"\u003eWhat kind of protection does Pettit Hydrocoat Eco provide?\u003c\/h3\u003e \u003cp style=\"margin-top: 0; margin-bottom: 12px;\"\u003ePettit Hydrocoat Eco is a copper-free, water-based ablative antifouling paint designed to provide multi-season protection against marine growth. Its self-polishing formula helps reduce paint build-up while continuously exposing fresh biocide for long-lasting performance.\u003c\/p\u003e \u003ch3 style=\"margin-top: 5px; margin-bottom: 0; font-size: 12pt;\"\u003eIs Pettit Hydrocoat Eco safe for aluminum and underwater metal parts?\u003c\/h3\u003e \u003cp style=\"margin-top: 0; margin-bottom: 12px;\"\u003eYes. Pettit Hydrocoat Eco is a strong option for aluminum hulls, jet drives, outdrives, outboard motors, and other properly prepared underwater metal parts when the recommended primer system is followed.\u003c\/p\u003e \u003ch3 style=\"margin-top: 5px; margin-bottom: 0; font-size: 12pt;\"\u003eHow much coverage does Pettit Hydrocoat Eco provide?\u003c\/h3\u003e \u003cp style=\"margin-top: 0; margin-bottom: 12px;\"\u003ePettit Hydrocoat Eco provides approximately 430 square feet of coverage per gallon. Actual coverage can vary depending on hull size, surface condition, and the number of coats applied.\u003c\/p\u003e \u003ch3 style=\"margin-top: 5px; margin-bottom: 0; font-size: 12pt;\"\u003eHow many coats of Pettit Hydrocoat Eco should be applied?\u003c\/h3\u003e \u003cp style=\"margin-top: 0; margin-bottom: 12px;\"\u003ePettit recommends a minimum of 2 coats with an additional coat at the waterline. Depending on the substrate and preparation system, 2 to 3 coats may be used for added protection.\u003c\/p\u003e \u003ch3 style=\"margin-top: 5px; margin-bottom: 0; font-size: 12pt;\"\u003eHow long should Pettit Hydrocoat Eco dry before launch?\u003c\/h3\u003e \u003cp style=\"margin-top: 0; margin-bottom: 12px;\"\u003eMinimum launch time depends on temperature. At 90°F the minimum launch time is 12 hours, at 70°F it is 16 hours, and at 50°F it is 48 hours.\u003c\/p\u003e \u003c!-- snippet location product_description --\u003e \u003cp\u003e California Residents: \u003cimg src=\"https:\/\/cdn11.bigcommerce.com\/s-6rtev5owwo\/stencil\/4c731d90-821b-013f-159c-7692448c53ea\/e\/5184b8b0-7ec1-013f-1cb3-16eaae88d95a\/img\/warning.png\" alt=\"warning sign\" class=\"warningImg\"\u003e \u003cstrong\u003e WARNING \u003c\/strong\u003e Cancer and Reproductive Harm - \u003ca href=\"https:\/\/www.p65warnings.ca.gov\/\" class=\"productWarning\"\u003eP65Warnings.ca.gov\u003c\/a\u003e \u003c\/p\u003e","brand":"Pettit Paint","offers":[{"title":"Default Title","offer_id":67605708505403,"sku":"PET-1204G","price":395.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/4271\/8779\/files\/426947_source_1751912177_fbd737be-5602-4f66-8bed-f6c7ee16f2a4.jpg?v=1790786434","url":"https:\/\/clinchriverfishingusa.com\/products\/pettit-paint-hydrocoat-eco-blue-gal-pet-1204g","provider":"Clinch River Fishing USA","version":"1.0","type":"link"}