{"product_id":"trac-outdoor-pontoon-35-f-w-anchor-winch-trc-69003","title":"Trac Outdoor Pontoon 35 F.W. Anchor Winch","description":"\u003ch2\u003eTRAC G3 Pontoon 35 Electric Anchor Winch\u003c\/h2\u003e \u003cp\u003eThe TRAC Pontoon 35 Anchor Winch allows you to raise and lower your anchor with the press of a button! TRAC's line of Generation 3 anchor winches offer simple, smooth operation and provide excellent holding power. This anchor winch features a high-efficiency 12-volt DC all steel gear motor that uses less battery power than other makes. This winch has power up\/down switch functions and utilizes an anti-reverse internal clutch to prevent free-spooling. Other great features include an integrated anchor davit and a die-cast aluminum gearbox.\u003c\/p\u003e \u003cp\u003eThe TRAC Pontoon 35 Anchor Winch includes 100' of pre-wound double braid anchor rope, a circuit breaker, sealed membrane UP\/DOWN switch, marine-grade battery wire, assembly hardware, and instructions. This winch is suitable for applications requiring heavier anchors, up to 35 lbs. and is ideal for pontoon boats of all sizes. The Pontoon 35 is backed by TRAC's 1 year manufacturers warranty.\u003c\/p\u003e \u003ch3\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eProvides excellent holding power\u003c\/li\u003e \u003cli\u003eIntegrated anchor davit\/roller\u003c\/li\u003e \u003cli\u003eDie-cast aluminum gearbox\u003c\/li\u003e \u003cli\u003e68 mm heavy-duty DC motor\u003c\/li\u003e \u003cli\u003eSmaller footprint than competitors\u003c\/li\u003e \u003cli\u003eSleek exterior case design\u003c\/li\u003e \u003cli\u003e1 Year warranty\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSuggested Boat Size: Up to 24'\u003c\/li\u003e \u003cli\u003eRope Capacity: 5mm x 100 ft, 6mm x 90 ft\u003c\/li\u003e \u003cli\u003eAnchor Deployment: Power Down\u003c\/li\u003e \u003cli\u003eMax Rode Weight: 35 lbs.\u003c\/li\u003e \u003cli\u003eRope Speed Up: 70 FPM\u003c\/li\u003e \u003cli\u003eSwitch Functions: Power UP \/ DOWN\u003c\/li\u003e \u003cli\u003eAmp Draw @ 12V: 10-12 Amps\u003c\/li\u003e \u003cli\u003eWinch Dimensions: 18\" L x 9\" W x 6\" H\u003c\/li\u003e \u003cli\u003eDeck Space Used: 18\" L x 9\" W\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eReplaces old TRAC part number T10109-G3\u003c\/p\u003e \u003ch3\u003e\u003cstrong\u003eTools Required for Installation:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eElectric Drill\u003c\/li\u003e \u003cli\u003e5\/16’’ (7.9mm) Drill Bit\u003c\/li\u003e \u003cli\u003eElectrical Terminal Crimping Tool\u003c\/li\u003e \u003cli\u003eAdjustable Wrench\u003c\/li\u003e \u003cli\u003ePhillips Screw Driver\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eMaterials Required for Installation:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWinch and Anchor Roller (included)\u003c\/li\u003e \u003cli\u003eSeven 8mm bolts, washers and nuts (included) – Longer bolts may be required if your deck is very thick.\u003c\/li\u003e \u003cli\u003eShackle for anchor attachment (included)\u003c\/li\u003e \u003cli\u003eAnchor (not included – up to 30lb. (13.6 kg))\u003c\/li\u003e \u003cli\u003eBattery Wire and Circuit Breaker (included)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eInstalling Anchor Winch On Boat Deck:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eThe anchor winch can be installed on the fore (front) or the aft (rear) of the boat.\u003c\/li\u003e \u003cli\u003eLocate anchor roller and winch on deck in desired location. The anchor roller must be located at the edge of the deck and must be extended over the edge to allow the anchor to clear the deck when it is docked in the anchor roller.\u003c\/li\u003e \u003cli\u003eLook below the deck and check for any obstructions underneath the desired anchor roller and winch locations. Make sure there is enough space for the rope spool on the winch to be centered on the anchor roller.\u003c\/li\u003e \u003cli\u003eUsing a marker, mark the anchor roller and winch mounting holes on the deck.\u003c\/li\u003e \u003cli\u003eNote: There are several bolt holes in winch frame to choose from. The easiest to use are the 4 slots (2 on each end of the frame). There are also holes for the battery lead wires so you can route the wires through the deck id you desire.\u003c\/li\u003e \u003cli\u003eRemove winch and anchor roller. Drill the holes. Bolt to deck. Use fender washers and\/or marine plywood under the deck to ensure the greatest strength and to spread the load.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDo not use wire sizes smaller than 14 AWG with 105 degree C rated insulation.\u003c\/li\u003e \u003cli\u003eThe wires and switch are all properly connected.\u003c\/li\u003e \u003cli\u003eYou will need to route the battery wires from the winch to battery and connect the RED positive (+) wire to the silver post on the circuit breaker.\u003c\/li\u003e \u003cli\u003eThe small hole on the buss bar (flat stamped metal part with two holes) is attached to the colored post on the circuit breaker and the large hole on the buss bar is attached to the battery positive terminal.\u003c\/li\u003e \u003cli\u003eThe BLACK negative (-) wire is attached to the battery negative terminal.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eAnchor Attachment:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAttach the shackle to the anchor shank eye.\u003c\/li\u003e \u003cli\u003eTie the rope to the anchor shackle.\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003e\u003cstrong\u003eAnchor Winch Operation:\u003c\/strong\u003e\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTo lower the anchor press and hold the switch in the “down” position for a few seconds and release the switch.\u003c\/li\u003e \u003cli\u003eThe anchor will freefall to the lake or river bottom.\u003c\/li\u003e \u003cli\u003eAllow the boat to drift and pull additional rope out of the winch.\u003c\/li\u003e \u003cli\u003eTo stop the rope from coming out of the winch, press the switch UP button for a couple seconds. This will lock the spool and keep it from letting more rope out.\u003c\/li\u003e \u003cli\u003eTo raise the anchor, press and hold the switch in the “up” position.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003ca href=\"https:\/\/www.wholesalemarine.com\/content\/PDFs\/TRAC-Anchor-Winch-Dimensions-Bolt-Patterns.pdf\"\u003e\u003cimg class=\"__mce_add_custom__\" title=\"pdficon.png\" src=\"https:\/\/cdn10.bigcommerce.com\/s-6rtev5owwo\/product_images\/uploaded_images\/pdficon.png\" alt=\"pdficon.png\" width=\"45\" height=\"43\"\u003e\u003cspan style=\"text-decoration: underline; color: #3366ff;\"\u003eClick here to download Pontoon 35 Installation Parameters\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e \u003cp\u003eInformation sourced from the TRAC Pontoon Coastal Anchor Winch User Manual.\u003c\/p\u003e","brand":"Trac Outdoor","offers":[{"title":"Default Title","offer_id":67606445261115,"sku":"TRC-69003","price":404.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0907\/4271\/8779\/files\/Untitled-1__01368.1763741574.jpg?v=1790721230","url":"https:\/\/clinchriverfishingusa.com\/products\/trac-outdoor-pontoon-35-f-w-anchor-winch-trc-69003","provider":"Clinch River Fishing USA","version":"1.0","type":"link"}