The Garmin GT17M-THF 1kW medium CHIRP through-hull transducer is engineered for serious anglers and cruising enthusiasts who demand precise sonar with minimal drag. Its 12-degree tilt and stainless steel housing are built for flush mounting on boats with hull deadrise angles from 8° to 15°, delivering reliable depth readings and crisp target returns.
-
Transducer Type: Through-hull with a 12° tilt, designed for flush mounting on boats with hull deadrise angles from 8° to 15°
-
Tilt Angle: 12° tilt to optimize beam orientation for clear sonar returns
-
Hull Deadrise Compatibility: Supports 12° hull deadrise for angles from 8° to 15°
-
Power: 1 kW for strong, low-noise sonar returns and enhanced target separation
-
Frequency: Medium band CHIRP (80–165 kHz)
-
Beamwidth: 9°–18°
-
Maximum Depth: 1800 ft saltwater; 2400 ft freshwater
-
RAPIDRETURN™ Sonar Compatible
-
Transducer Cable Length: 50 ft
-
Depth/Speed/Temperature: Depth and temperature sensing
-
Pins: 8-pin
-
Housing Material: Stainless steel
-
Installation Type: Through-hull, flush mounting
-
Auto-ID Technology: Auto-ID automatically configures the sonar to the transducer, simplifying installation
-
Included In The Box: GT17M-THF transducer, jam nut, spacer, 2 washers, 2 set screws, thread isolator, hull isolator, documentation
With 1 kW of power, 80–165 kHz CHIRP, and a focused beam, this transducer delivers clear, actionable returns across a wide coverage area. The robust stainless-steel housing and straightforward installation make it a durable choice for both saltwater and freshwater vessels, helping you read bottom depth, distinguish targets, and optimize your lineups with confidence.
| TRANSDUCER FREQUENCY |
medium band CHIRP (80-165 kHz) |
| TRANSDUCER POWER |
1 kW |
| TRANSDUCER BEAMWIDTH |
9°-18° |
| TRANSDUCER MAXIMUM DEPTH |
1800 ft saltwater; 2400 ft freshwater |
| RAPIDRETURN™ SONAR COMPATIBLE |
Yes |
| TRANSDUCER CABLE LENGTH |
50 ft |
| TRANSDUCER DEPTH/SPEED/TEMPERATURE |
depth, temperature |
| TRANSDUCER NUMBER OF PINS |
8-pin |
| TRANSDUCER SUPPORTED DEADRISE/TRANSOM ANGLES |
12° supports hull deadrise angles from 8° to 15° |
| HOUSING MATERIAL |
stainless steel |