Victron Phoenix Inverter 12/800 – 120V delivers clean, dependable 230V/120V AC power from 12V leisure or automotive batteries, so you can run household appliances, tools, and electronics anywhere. This compact inverter includes a built‑in GFCI duplex outlet for safety and a VE.Direct port for easy monitoring and configuration.
-
Power and outlets — Continuous power 650 W (800 VA) with peak power up to 1500 W; output selectable as 230VAC or 120VAC, ±3%, at 50 Hz or 60 Hz (±0.1%).
-
GFCI outlet — Built‑in GFCI duplex outlet for safe, outlet‑level protection.
-
VE.Direct connectivity — VE.Direct port can connect to a computer (VE.Direct to USB interface cable) or to Apple/Android devices (VE.Direct Bluetooth Smart dongle) for monitoring and configuration.
-
Fully configurable — Set low battery voltage alarm/trip levels, low voltage cut‑off and restart levels, and dynamic cut‑off (load‑dependent). Battery charged detect and other protections are adjustable.
-
Monitoring — Real‑time monitoring of in‑ and output voltage, load percentage, and alarms, with diagnostic indicators.
-
Reliability — Proven full bridge plus toroidal transformer topology; short‑circuit proof and protected against overheating from overload or high ambient temperature.
-
High start‑up power — Designed to start loads such as LED drivers, halogen lamps, or electric tools without tripping.
-
ECO mode — Energy‑saving mode that switches to standby when the load falls below a preset value (min load 15 W). It wakes periodically (default every 2.5 seconds) and can be adjusted for stop/start power.
-
Remote On/Off — Use a remote on/off switch connected to a two‑pole connector or between battery plus and the connector for convenient control.
-
Load transfer — For seamless operation when transferring loads to another AC source, Victron supports compatible Automatic Transfer Switches (Filax) with very fast switchover (less than 20 ms).
-
Efficiency & idle power — Maximum efficiency up to 90–91%; zero‑load power around 6.5–9.5 W depending on conditions; ECO mode further reduces idle consumption.
-
Physical & enclosure — Steel chassis with a blue plastic cover (RAL 5012); battery connection via screw terminals; designed for harsh environments with a wide operating range.
-
Specifications at a glance — Input voltage range: 9.2–17 V, 18.4–34 V, or 36.8–62.0 V DC; DC low shut‑down and restart levels are configurable; output voltage/frequency is adjustable; enclosure temperature range from −40 to +65°C with fan‑assisted cooling; max continuous power at 25°C: 650 W (800 VA), at 40°C: 560 W; peak power: 1500 W.
