The Xantrex Freedom XC PRO 3000 is a powerful, all-in-one inverter/charger that converts 12V DC from your battery bank into clean 120V AC power for essential appliances, tools, and electronics. Built for demanding RV, boating, and off-grid applications, this compact, lightweight unit combines a true sine wave inverter with a 150A battery charger and a convenient transfer switch for seamless power management.
-
True Sine Wave AC Power ensures smooth operation for sensitive electronics and motor loads, reducing the risk of equipment malfunctions.
-
3000 W Continuous Inverter with a 6000 W surge (2x continuous) for 5 seconds to reliably start compressors, pumps, and other high-startup motors.
-
Ignition Control allows the inverter to turn on/off via a 12 VDC signal, minimizing battery drain when your vehicle’s ignition is off.
-
Wide Input Range 10–18 VDC ensures operation on high-voltage alternators found in many vehicle chassis.
-
Programmable Under-Voltage Shutdown (85–110 VAC) to protect equipment when shore power or generator input is weak.
-
Built-in 50A AC Transfer Relay (3 kW model) automatically senses external AC power and transfers the load from the inverter to shore power to maximize uptime.
-
Power Factor Corrected Multi-Stage Charging improves efficiency and reduces shore power demand, freeing up more usable AC power for devices and appliances.
-
Programmable 3-Stage Battery Charging with temperature compensation for optimal charging of almost any battery type up to 18V.
-
Battery Equalization extends flooded battery life by balancing cell voltages during charging.
-
Dead Battery Charging down to 0 Vdc for easier recovery in challenging conditions.
-
Power Share prioritizes AC loads by reducing the charge current to keep total input current under the breaker limit.
-
Flexible Lithium Battery Support and easy configurability to charge various chemistries for modern power setups.
-
RV-C and J1939 Protocols compatibility for seamless integration with modern vehicle and RV systems.
-
Wide Operating Temperature Range supports -4°F to 104°F (-20°C to 40°C) with output derating at higher temperatures.
-
Extended Surge Capability helps start compressors and refrigerators reliably, even under demanding loads.
Designed for reliability in any climate
The Freedom XC PRO 3000 delivers full performance in both invert and charge modes across a broad temperature spectrum, making it ideal for RVs, boats, motorhomes, and off-grid cabins. It operates on 12V DC and delivers clean, stable 120V AC power wherever you go, with smart features that maximize battery life and minimize energy waste.
Key specifications
- AC Output: 120, 110, or 108 VAC (configurable)
- Continuous Power: 3000 W @ 40°C
- Surge Power: 6000 W for up to 5 seconds
- Frequency: 60 Hz (or 50 Hz configurable)
- Peak Efficiency: 91%
- Full Load Efficiency: ≥84%
- Operating Temperature: 4 to 140°F (-20 to 60°C); derates above 104°F (40°C)
- AC Pass-Through Input Range: 85–140 VAC
- Non-Operating Input Range: Up to 240 VAC RMS
- Transfer Relay: 50A AC (3 kW model)
- Battery Charger
- Min Battery Voltage for Charging: 0.0 V
- Max DC Output Voltage: 18.0 V
- Max DC Charge Current: 150 A
- Charger Type: PF-corrected multi-stage with temperature compensation
- Three-Stage Charge with Battery Equalization
- Supports Lithium-Ion batteries and almost any other chemistries
- Operating Humidity: 5–95% RH (non-condensing)
Whether you’re powering appliances on the road, keeping a fridge running at a campground, or running tools on a remote job site, the Xantrex Freedom XC PRO 3000 delivers dependable, efficient, and flexible AC power. It’s the ultimate companion for reliable off-grid enjoyment and advanced vehicle electrical systems.
| Inverter Specifications |
| AC Output Operating Voltage Options |
120, 110, 108 Vac |
| Continuous Output Power |
Continuous Power 3000 W @40 C True sine wave (TSW) |
| Continuous AC Output Current |
25A |
| Surge Power |
6000 W (? 5 sec) |
| Frequency (Configurable) |
60 (or 50) Hz |
| Peak Efficiency |
91% |
| Full Load Efficiency |
greater than or equal to 84% |
| Operating Input AC Pass-Through Voltage Range |
85-140 Vac |
| Safe Non-Operating Input AC Voltage Range |
Up to 240 Vac RMS |
| Power Factor at Full Charge Rate |
> 98% |
| Battery Charger Specifications |
| Min Battery Voltage for Charging |
0.0 Vdc |
| Max DC Output Voltage |
18.0 Vdc (custom battery type) |
| Selectable DC Output Current |
User Selectable: 5 - 150 A |
| Full Load Max AC Input Current |
25 Arms |
| Max DC Charge Current |
150A |
| General Specifications |
| Operating Temperature Range |
4 to 140 F (-20 to 60 C), with output derated above 104 F (40 °C) |
| Storage Temperature Range |
-40 to 158 F (-40 to 70 C) |
| Operating Humidity Range |
5 to 95% RH, non-condensing |
| Transfer Relay AC Current Rating |
50 A surge, 40 A continous |
| DC Input Operating voltage range |
10.1 - 18.0 VDC |
| DC Input Max Non-Operating Voltage |
25 Vdc |
| DC Input/Output Nominal Voltage (inverting/ Charging) |
12.0 Vdc |
| DC Nominal Current at Full Load |
304Adc |
| L x W x H (without flanges) |
5.4"(390 mm) x 10.8"(275 mm) x 4.9"(125 mm) |
| L x W x H (with flanges) |
16.0"(406 mm) x 12.0"(305 mm) x 4.9"(125 mm) |